Both types of printing are different. The similarities are that both are published on substrates and produce a picture. Besides that? Not too much.
The screen-printing procedure employs a very labor-intensive setup you don't need with dye sublimation printing. You can also hire professional screen printing in Brisbane via https://www.australianmerchco.com.au/screen.
Image Source: Google
The Display Mesh
There are various kinds of screen mesh, beginning at approximately 100 threads per square inch and moving up to several hundred threads per square inch. The coarse mesh has become less common because it's used with oil-based tooth inks that have been replaced, by and large, using UV inks, which we operate via a 220 mesh count because the ink particulates are a lot smaller than using the old solvent inks.
When the screen is attached and glued to a framework, we usually use cloth tape to tape the edges of the framework, both indoors and outside. This is a semi-automatic remedy to getting ink flow out around the borders of the emulsion.
The display is prepared for the photosensitive emulsion, which can be applied with a scoop coater, a changeable length tray which emulsion is hauled into. After implementing the emulsion into the display, we proceed the display to a level, curtained drying/storage cupboard, in which it dries.
Screen Press Weakness
The largest weakness of screen printing is that we need to produce a new display for every single colour printed, which makes the setup time for display printing very time-consuming.
We put ink on the display and publish anything it is we are printing, state, bumper decals or auto window stickers or decals, or window decals for a company, or hints, or our customers dictate.